How to Replace the Replacement Key Battery For the Saab 9-3
Saab owners have to follow a series of unique steps to add an additional ignition key. This requires a handheld computer, called Tech-2, to be used by the dealer. Then a new key and transponder have to be purchased and programmed to the car.
It is recommended to rotate your keys so that one doesn't wear out faster than the other. This will keep your keys in pristine condition.
Replacement Case
The new key fobs aren't like the older Saab keys. They are equipped with electronics that make them difficult to copy. This has made theft of cars much more complicated than it was 20 years ago. However, it has made replacing lost keys a comparatively costly endeavor.
Every owner of a Saab 9-3 needs to have at least two working keys. If one is lost, it is expensive to purchase a new one for the car because it involves replacing the CIM module and re-programming the locking cylinders. Dealers usually charge between $100-$200 to complete this.
There are several ways to get around these expensive. Some parts dealers will use the code of a spare key to cut a new metal blade for a fraction of the price of the dealer. The key must be exactly the same as the original to allow it to function in your vehicle.
Follow these steps to replace the case. You'll require a flathead screwdriver along with some patience. Utilizing the screwdriver, slowly pull the plastic apart and then separate the emergency key from the case. Once the case has been opened, remove all electronics and put them in your new case. Be sure to put the correct badge and key back in the case too.
Replacement Battery
The replacement battery for the Saab 9-3 is an affordable component that can be replaced easily and quickly. This video tutorial on DIY from YouTube user Cyclone Cyd explains how to replace the battery in the remote key fob in only four steps. This tutorial should work with any modern Saab key fob. However, the procedure could differ slightly.
The first step is to locate the button that releases the backup key inside the fob. This button is usually located near the Saab logo on the back of the fob. Use a flathead screwdriver to insert the screwdriver through the small hole on this button. This should be enough to let the fob case open so that you can change the battery.
After you have installed the new battery CR1632, you are able to put back together your remote key fob. Then, you can program it into your car. The entire process should take no more than an hour at most. It is a simple procedure that doesn't require any special equipment.
If you lose a key, the process is somewhat more complex however, it can be completed. The dealer has to find the VIN number of the car and then order a new key blade and TWICE module, both with the exact unique code. The dealer will then have to program the key using MDI, a new software tool.
Replacement Key Fob
The key fob contains a battery that is used to lock and unlock your vehicle. The batteries last for a certain time that is a long time, and they eventually die. This is a problem that occurs in all vehicles. The good news is you can replace the battery in all key fobs without having to replace the entire case. You can buy replacement fobs from Amazon that have all the electronics already installed, which means you can simply open the case and replace the batteries in the original case. You will need to remove the emergency key before you can replace the batteries. To accomplish this, simply insert a small screwdriver that is flat into the slot in the middle. Use the screwdriver to move around the case until it is split open, making it easy to take it out.
If thekeylab.co.uk planning to replace your keys, have an extra set on hand. This will save you a significant amount of money. If you have spare keys, you can ask the dealer to cut an entirely new key and then program it to the car, which is cheaper than replacing the entire key fob.
It is possible to add a second key to your car if you don't already have one, but it will require lots of research and effort. The cost for adding a second key is around a hundred dollars and it also requires the programming of the car's computer. This can be done by a professional, however it's a costly option for most owners.
Replacement Ignition
The modern SAAB 9-3 is an advanced alarm system built on a keycode. If you lose your sole key, it may be expensive to add another one, as the car has to have a special computer added and be programmed to accept a new key. Most locksmiths cannot do this or even dealers will charge hundreds of dollars just to program the new key!
If you've lost your only working key, a dealer will replace your car's computer (known as the CIM or SAAB TWICE) in order to make the replacement, and will charge a premium for it. We can reprogram the EEPROM on your car's computer to make it ready for an extra key. This will save you more than 50% of what you would pay at an auto dealer.
If you've owned a SAAB 9-3 for many years and you're aware of the ignition keys aren't very durable. They can become extremely sticky and the buttons are known to fall off occasionally It is recommended that you consider getting a replacement if yours isn't working properly. Fortunately, replacing the ignition key isn't as complicated as it sounds, and it can be done fairly quickly with the appropriate tools.